Portable Shipping Container Office / Storage - From 900

Description

This portable office is built from a 40FT used standard height shipping container (CONEX). It is divided in two areas, office (20” x 7’) and Storage (20” x 7’), each with independent access.  Office fully insulated and finished walls. All electrical wires are run in flexible conduit.  This container is designed as a portable unit that can be plugged-in as an RV or boat with a power cord.
Each shipping container model can be modified to the customer’s needs like additional windows, doors, exterior color etc.
Specifications
Insulation:
•
Walls and ceiling R13
HVAC:
•
Office: Mini-Split System (Heating/Cooling) 9000 BTU, 208-230 Volts, 18 SEER+
Windows and Doors:
•
Office: 1 Sliding glass door
•
1 Single hung window (Low E, Vinyl frame, white)
•
Storage: Roll-Up Door
Flooring:
•
Office and storage:  Original marine-grade 1" plywood
Electrical:
•
Power intake 220 Volts
•
50Amp Power inlet box
•
125Amp Breaker box
•
4 electrical outlets 110V at office; 2 electrical outlet 110V at storage
•
2 ceiling light fixtures at office; 1 LED utility shop light
Coati
ng:
•
Exterior Pro industrial DTM Acrylic. Color: Up to the client
Ordering Process
Step 1
Design and Customization
A preliminary design is presented based on the client’s requirements. At this point the client will choose exterior color, locations of door and windows, or any optional items as TV mounts, additional electrical outlets, etc.
Step 2
Site Survey
It is recommended to have a survey or sketch of the property to determine the exact location where the container will be installed. This will help with delivery process. This shipping container is recommended to be set over an existent concrete slab or four 2ftx2ft concrete pads.
Step 3
Final Design
A final design is discussed and presented. Once the client approves the distribution and technical specifications shown and described in final design provided by Welding to Recycle, a final price is calculated.
Step 4
Final Pricing
After final design is approved by the client, a final price is presented. At this point, a 50% deposit is required to place the order.
Step 5
Fabrication
Once initial deposit is received and final design is approved, fabrication starts. This process may take up to 45 business days.
Step 6
Delivery
When the container is ready for transportation, the other 50% is paid and the unit will be ready to leave via an approved transportation company designated by the client or welding to Recycle (delivery fee not included in the estimate).
Step 9
Installation
Your container will be dropped at the designated location either with the trailer or using a crane.
Step 10
Move In
Move In
Move in into your new Container.