-40%
HONEYWELL Resideo S89E1058, S89E-1058, S89E 1058 DIRECT SPARK IGNITION MODULE
$ 116
- Description
- Size Guide
Description
HONEYWELLS89E 1058 Primary Control
Direct Spark Control
DSI Control
DUAL ROD DIRECT SPARK IGNITION MODULE, 100% SHUTOFF WITH LOCKOUT,
REQUIRES EXTERNAL 120 VAC SPARK TRANSFORMER, 2 AMP GAS VALVE, 24 VAC.
4 SECOND
LOCKOUT.
S89E1009 HONEYWELL FUNCTIONAL S89E1033 HONEYWELL FUNCTIONAL
Features
• Controls ignition sequence and gas control
operation in direct spark ignition systems.
• Control separate 120 Vac spark generator
that provides high voltage potential for main
burner ignition.
• Lockout after one trial for ignition if main
burner fails to ignite.
• Reset from thermostat after lockout.
Use separate electrodes for spark ignition
and flame sensing.
• Use any 24 Vac combination gas control
designed for direct spark applications
and rated at 2.0A or less.
Product Specifications
Ignition System Type
Direct Spark Ignition
Ignition Sequence
Single trial for main burner ignition
(then shut down and lockout)
Typical Gas Control
VR8205, VR8305
Type of Gas
Natural or LP
Flame Sense
Two Rod
Ignition Source
External (120 VAC powered)
High Voltage Spark Generator
PrePurge
Ignition Trials To Lockout
1
Lockout Timing
4 sec.
Ignition Trial Time (sec)
4 sec.
Maximum Valve Load @ 24 Vac (Amps)
2A
Typical Ignition Hardware
Q652, Q345
Dimensions (in.)
5 1/4 in. high x 4 1/16 in. wide
x 1 15/16 in. long
Dimensions (mm)
133 mm high x 103 mm wide
x 49 mm deep
Electrical Ratings
24 Vac
Frequency
60 Hz
Maximum Ambient Temperature (F)
-40 F to +175 F
Maximum Ambient Temperature (C)
-40 C to +79 C
Approvals, Canadian Standards Association
Design Certified
Flame Failure Response Time (sec)
2.0 sec. @ 2.5 microamp
Flame Failure Re-ignition Time (sec
Please note some of the items require
professional
knowledge
and skills to
handle
or installed.
homas New Parts is not
responsible
for any
damage
or injuries
resulted
from mishandling of
professiona
l
products.
All HVACR equipment should be
serviced
installed
by certified professionals only.
Please let us know if you have any
concerns or questions.