2 Pack 28" Archer Chainsaw Chain 3/8" FULL CHISEL SKIP TOOTH .050 Gauge 91DL

Description

This is (2) loops of Archer brand high quality FULL CHISEL SKIP TOOTH saw chain, this chain is 3/8 pitch, .050 gauge and has 91 drive links. This chain fits many Husqvarna, Jonsered, Stihl and other brands of chain saws that are using a  28"
guide bar that are .050 gauge.
Your cost is only .11 per loop with FREE shipping!
***This chain is a non-safety professional chainsaw chain***
Note: All Chainsaw chains are a called length, in order for your replacement chain to fit you must always match the
pitch, gauge and drive link count
!
The
drive link count
is the number of drive links in the loop of chain, the drive link is the triangular part of the chain that rides in the groove of the guide bar. The
gauge
is the width of the opening of your guide bar groove (or the thickness of your drive link) and the most common gauges are .043, .050, .058, and .063.
Pitch
is the actual measured distance between any three rivet heads on the chainsaw chain divided by two, the most common pitches are ¼”, 3/8LP(low-pro), .325, 3/8” and .404. The pitch and gauge of a chain are not easily measured so the pitch and gauge of your chain is best determined by using the chain manufacturing codes from the old chain that are found stamped on the drive links (and all the chain manufacturers use different codes) also many times the pitch, gauge, and drive link count are found stamped on the tail end of the guide bar. If you need any help in determining what size chain you need please contact us.
Archer Saw Chain, Archer Guide Bars and Archer Accessories are known for quality and sold world wide!